Home / Edgecore / Access Points / EAP102
Indoor Wi-Fi 6 access point
A high-capacity Wi-Fi 6 access point with 4x4 MU-MIMO on 5 GHz and two 2.5GbE ports, built for busy floors, conference rooms and lobbies. RedCell designs, pre-provisions and supports it from the US.
2.9 Gbps
Max aggregate data rate
4x4
MU-MIMO on 5 GHz
2.5GbE
PoE+ uplink, plus a 2.5GbE LAN port
OpenWiFi
Open-source version supported
2.9 Gbps
Max aggregate data rate
4x4
MU-MIMO on 5 GHz
2.5GbE
PoE+ uplink, plus a 2.5GbE LAN port
OpenWiFi
Open-source version supported
Overview
The EAP102 pairs 2x2 on 2.4 GHz with 4x4 MU-MIMO on 5 GHz, serving more devices at once in lobbies, open offices and meeting spaces. Both Ethernet ports run at 2.5GbE. It runs standalone or under ecCLOUD and EWS controllers, with no license that has to stay paid for it to keep working.
2x2 on 2.4 GHz and 4x4 MU-MIMO on 5 GHz, with 80 MHz channels.
574 Mbps on 2.4 GHz and 2,400 Mbps on 5 GHz.
802.3at PoE input on a 2.5GbE uplink, plus a 2.5GbE LAN port.
WPA3 Personal and Enterprise, MAC authentication, captive portal and client isolation.
Up to 2.9 Gbps aggregate
574 Mbps on 2.4 GHz and 2,400 Mbps on 5 GHz.
Bluetooth Low Energy for iBeacon applications.
Standalone, Edgecore ecCLOUD or EWS controllers, with QR-code onboarding. OpenWiFi version available.
Two 2.5GbE ports
802.3at PoE input on a 2.5GbE uplink, plus a 2.5GbE LAN port.
Enterprise security
WPA3 Personal and Enterprise, MAC authentication, captive portal and client isolation.
BLE radio built in
Bluetooth Low Energy for iBeacon applications.
Manage it your way
Standalone, Edgecore ecCLOUD or EWS controllers, with QR-code onboarding. OpenWiFi version available.
Specifications from Edgecore’s published EAP102 product page.
Overview
More capacity for the busiest rooms.
The EAP102 pairs 2x2 on 2.4 GHz with 4x4 MU-MIMO on 5 GHz, serving more devices at once in lobbies, open offices and meeting spaces. Both Ethernet ports run at 2.5GbE. It runs standalone or under ecCLOUD and EWS controllers, with no license that has to stay paid for it to keep working.
Use cases
How RedCell puts the EAP102 to work in the industries we serve.
4x4 MU-MIMO on 5 GHz handles crowds in lobbies, ballrooms and conference areas, with captive portal for guests.
Larger stores and dining rooms get more capacity, with POS, staff and guest traffic kept apart by VLAN.
Lecture halls, libraries and common areas where many devices connect at once, with WPA3-Enterprise.
Suites, clubs and press areas. For concourses and open-air areas, RedCell specs the outdoor OAP101.
Conditioned indoor space (0–45 °C). For docks and yards, RedCell specs the outdoor OAP101.
Open offices and shared floors, managed from ecCLOUD or an on-site controller.
Multi-site restaurants & retail
Larger stores and dining rooms get more capacity, with POS, staff and guest traffic kept apart by VLAN.
Education
Lecture halls, libraries and common areas where many devices connect at once, with WPA3-Enterprise.
Warehousing: offices and indoor floors
Conditioned indoor space (0–45 °C). For docks and yards, RedCell specs the outdoor OAP101.
Offices & multi-tenant buildings
Open offices and shared floors, managed from ecCLOUD or an on-site controller.
30-day Edgecore trial
We ship you an Edgecore access point and switch, configured by RedCell for your network. Run them for 30 days, see the performance for yourself, then decide.
An access point and a PoE switch, shipped to you
Pre-configured by RedCell before it leaves
A US-based engineer on call for the whole trial
Specifications
From Edgecore’s published EAP102 product page.
HARDWARE & PHYSICAL
Uplink port
1 x 10/100/1000/2.5GBASE-T RJ-45, auto MDI-X, 802.3at PoE in
LAN port
1 x 10/100/1000/2.5GBASE-T RJ-45, auto MDI-X
Console & USB
1 x RJ-45 console, 2 x USB 2.0 (one active at a time)
Power
12 V / 2.0 A DC (adapter included) or 802.3at PoE (injector optional)
Max power draw
25 W (22 W on DC power)
Dimensions
195 x 201 x 39.8 mm
Weight
0.7 kg
Antenna
4 built-in; 5.5 dBi (2.4 GHz, BLE), 7.6 dBi (5 GHz)
Mounting
Wall, ceiling or T-bar; kit included
Operating environment
0 to 45 °C (32 to 113 °F); 5–95% RH non-condensing
Certifications
FCC, CE, LVD, NCC, BSMI, VCCI, JATE, TELEC, IC, C-Tick
WI-FI & RADIO
Standards
802.11ax (Wi-Fi 6), concurrent 2.4 and 5 GHz
Radio chains / streams
2x2:2 (2.4 GHz), 4x4:4 (5 GHz), MU-MIMO
Max PHY rate
574 Mbps (2.4 GHz) · 2,400 Mbps (5 GHz)
Channel widths
2.4 GHz: 20/40 · 5 GHz: 20/40/80 MHz
Conducted TX power¹
Up to 23 dBm (2.4 GHz), 26 dBm (5 GHz)²
Frequency range
2.400–2.483 · 5.150–5.850 GHz³
SSIDs
Up to 16 per radio (32 total)
• 802.11k/r and OFDMA
• Client isolation
• Open Mesh
• WPA/WPA2/WPA3 Personal & Enterprise
• WPA3 transition modes
• MAC address authentication
• Standalone, ecCLOUD, EWS controller
• QR-code onboarding
• SSH, SNMP v2c, syslog, NTP
• 802.1Q and dynamic VLAN, ACL, NAT
• STP, DHCP, LLDP, RSSI threshold
• OpenRoaming, captive portal, TWT
¹ Aggregated across MIMO chains, excluding antenna gain. ² Limited by local regulations. ³ Some channels restricted by local regulations. Specifications subject to change.
WI-FI & RADIO
Standards
802.11ax (Wi-Fi 6), concurrent 2.4 and 5 GHz
Radio chains / streams
2x2:2 (2.4 GHz), 4x4:4 (5 GHz), MU-MIMO
Max PHY rate
574 Mbps (2.4 GHz) · 2,400 Mbps (5 GHz)
Channel widths
2.4 GHz: 20/40 · 5 GHz: 20/40/80 MHz
Conducted TX power¹
Up to 23 dBm (2.4 GHz), 26 dBm (5 GHz)²
Frequency range
2.400–2.483 · 5.150–5.850 GHz³
SSIDs
Up to 16 per radio (32 total)
RedCell support
Buy the EAP102 through RedCell and you get US-based engineers behind it, from the first floor plan to the last firmware update.
Network and RF design reviews so access points land where coverage and capacity need them.
Units configured before they ship, so your installers hang them and go.
Advanced support from US-based engineers, plus firmware and configuration help across your whole fleet.
01
Design.
Network and RF design reviews so access points land where coverage and capacity need them.
02
Pre-provision.
Units configured before they ship, so your installers hang them and go.
03
Support.
Advanced support from US-based engineers, plus firmware and configuration help across your whole fleet.
Downloads
RedCell edition · PDF · 4 pages
From Edgecore · PDF
From Edgecore · PDF
FAQ
No. It can run in standalone mode with no cloud account at all. For central management it works with Edgecore ecCLOUD and EWS controllers.
Both are dual-band Wi-Fi 6. The EAP102 adds 4x4 MU-MIMO on 5 GHz and two 2.5GbE ports, so it suits busier spaces. The EAP101 has two extra GbE LAN ports for wired devices in the room.
Use the included 12 V DC adapter, or power it over Ethernet from an 802.3at (PoE+) switch or injector. Connect it to a multi-gig switch port to get the full 2.5GbE uplink speed.
Yes. An OpenWiFi version of the EAP102 is available. Ask RedCell which version fits your deployment.
No. The EAP102 is an indoor access point rated for 0 to 45 °C. For docks, yards, concourses and other outdoor areas, RedCell specs the Edgecore OAP101.
Yes. RedCell ships you an Edgecore access point and a PoE switch, pre-configured for your network, to run for 30 days. A US-based engineer is on call for the whole trial.
FROM REDCELL INSIGHTS
LICENSING & OWNERSHIP
Meraki gives you 30 days of grace. After that, Cisco says devices stop passing client traffic.
HOSPITALITY
How to design hotel Wi-Fi that covers every room and holds up at peak hours.
OPEN NETWORKING
How disaggregated hardware works, who builds it, and when it makes sense for a business.
Related
Other Edgecore devices RedCell deploys, and the full lineup.
Talk to a RedCell engineer: 813 885 2600 · redcelltechnologies.com/contact
More capacity for your busiest rooms.
813 885 2600 · redcelltechnologies.com/contact