Decorative red wave lines

Home  /  Edgecore  /  Access Points  /  EAP105

Indoor Wi-Fi 7 access point

Edgecore EAP105
Wi-Fi 7. No subscription.

An enterprise-grade access point that runs 2.4, 5 and 6 GHz at the same time, built for crowded rooms, busy floors and guest networks. RedCell designs, pre-provisions and supports it from the US.

Edgecore EAP105 access point, angled view
Edgecore EAP105 access point, angled view
Edgecore EAP105 access point, rear view
Edgecore EAP105 access point, side view

9.34 Gbps

Max aggregate data rate

3 bands

2.4, 5 and 6 GHz, concurrent

5GbE

PoE+ uplink, plus a GbE LAN port

320 MHz

Channels on 6 GHz

9.34 Gbps

Max aggregate data rate

3 bands

2.4, 5 and 6 GHz, concurrent

5GbE

PoE+ uplink, plus a GbE LAN port

320 MHz

Channels on 6 GHz

Edgecore EAP105 access point, angled view

Overview

Wi-Fi 7 speed, enterprise security, nothing to renew.

Three radios run side by side, with 320 MHz channels on 6 GHz, 4K-QAM and Multi-Link Operation for faster speeds and lower latency. Built by Edgecore, the house brand of Accton Technology, it runs standalone or under ecCLOUD and on-site controllers, with no license that has to stay paid for it to keep working.

Tri-band Wi-Fi 7

2.4, 5 and 6 GHz concurrently, up to 320 MHz channels on 6 GHz, 2x2 MU-MIMO on each band.

Up to 9.34 Gbps aggregate

688 Mbps on 2.4 GHz, 2,882 Mbps on 5 GHz and 5,765 Mbps on 6 GHz.

5GbE PoE+ uplink, plus a LAN port

802.3at PoE input on a 5GbE port, and a second GbE port for a wired device.

Guest-network ready

WPA3, MPSK/DPSK, captive portal, OpenRoaming (Hotspot 2.0 R1) and client isolation.

Up to 9.34 Gbps aggregate

688 Mbps on 2.4 GHz, 2,882 Mbps on 5 GHz and 5,765 Mbps on 6 GHz.

Smart-room radios built in

BLE, Zigbee and Thread for iBeacon and Matter applications.

Manage it your way

Standalone, Edgecore ecCLOUD or EWS controllers, with zero-touch provisioning.

5GbE PoE+ uplink, plus a LAN port

802.3at PoE input on a 5GbE port, and a second GbE port for a wired device.

Guest-network ready

WPA3, MPSK/DPSK, captive portal, OpenRoaming (Hotspot 2.0 R1) and client isolation.

Smart-room radios built in

BLE, Zigbee and Thread for iBeacon and Matter applications.

Manage it your way

Standalone, Edgecore ecCLOUD or EWS controllers, with zero-touch provisioning.

Specifications from Edgecore’s published EAP105 product page.

Overview

Wi-Fi 7 speed, enterprise security, nothing to renew.

Three radios run side by side, with 320 MHz channels on 6 GHz, 4K-QAM and Multi-Link Operation for faster speeds and lower latency. Built by Edgecore, the house brand of Accton Technology, it runs standalone or under ecCLOUD and on-site controllers, with no license that has to stay paid for it to keep working.

Use cases

Where the EAP105 fits.

How RedCell puts the EAP105 to work in the industries we serve.

Bed icon

Hospitality: a Wi-Fi 7 AP in every room

Wall-plate mounting, a LAN port for the TV or phone, and per-room keys with MPSK/DPSK keep in-room deployments clean and secure.

Store icon

Multi-site restaurants & retail

Zero-touch provisioning and VLAN support let each site go live with POS, staff and guest traffic kept separate, managed from one view.

School icon

Education

OFDMA, MU-MIMO and BSS coloring keep a room full of laptops and tablets connected, with WPA3-Enterprise for staff and students.

Venue icon

Sports & venues

Three concurrent bands and Multi-Link Operation spread heavy client loads across suites, concourses and meeting spaces.

Warehouse icon

Warehousing: offices and indoor floors

A strong fit for conditioned indoor areas (IP41, 0–50 °C). For docks, yards and unconditioned space, RedCell specs an outdoor model.

Users icon

Offices & multi-tenant buildings

Enterprise features for growing offices and shared buildings, with management access included under RedCell advanced support.

Store icon

Multi-site restaurants & retail

Zero-touch provisioning and VLAN support let each site go live with POS, staff and guest traffic kept separate, managed from one view.

School icon

Education

OFDMA, MU-MIMO and BSS coloring keep a room full of laptops and tablets connected, with WPA3-Enterprise for staff and students.

Warehouse icon

Warehousing: offices and indoor floors

A strong fit for conditioned indoor areas (IP41, 0–50 °C). For docks, yards and unconditioned space, RedCell specs an outdoor model.

Users icon

Offices & multi-tenant buildings

Enterprise features for growing offices and shared buildings, with management access included under RedCell advanced support.

30-day Edgecore trial

Test it on your network before you buy.

We ship you an Edgecore access point and switch, configured by RedCell for your network. Run them for 30 days, see the performance for yourself, then decide.

Check icon

An access point and a PoE switch, shipped to you

Check icon

Pre-configured by RedCell before it leaves

Check icon

A US-based engineer on call for the whole trial

Edgecore ECS5500-12P switch, angled view Edgecore EAP105 access point, angled view
Edgecore ECS5500-12P switch, angled view Edgecore EAP105 access point, angled view

Specifications

Full specifications.

From Edgecore’s published EAP105 datasheet (April 2025).

HARDWARE & PHYSICAL

Uplink port

1 x 100/1000/2500/5000BASE-T RJ-45, auto MDI-X, 802.3at PoE in

LAN port

1 x 100/1000BASE-T RJ-45, auto MDI-X

Power

802.3at PoE (injector not included) or USB-C DC, PD 3.0, 15–20 V (adapter not included)

Max power draw

23.58 W

Dimensions

179 x 195 x 35 mm

Weight

0.907 kg

Antenna

Built-in; 5 dBi (2.4 GHz), 6 dBi (5 GHz), 6 dBi (6 GHz), 3.7 dBi (BLE)

Mounting

Wall, wall-plate, ceiling or T-bar; kit included

Operating environment

0 to 50 °C (32 to 122 °F); 5–95% RH non-condensing

Ingress rating

IP41

Certifications

FCC, IC, CE, TELEC, VCCI, NCC, BSMI, UKCA, UL2043 plenum

WI-FI & RADIO

Standards

802.11a/b/g/n/ac/ax/be (Wi-Fi 7), concurrent 2.4, 5 and 6 GHz

Radio chains / streams

2x2 per band; 6 spatial streams total

Max PHY rate

688 Mbps (2.4 GHz) · 2,882 Mbps (5 GHz) · 5,765 Mbps (6 GHz)

Channel widths

2.4 GHz: 20/40 · 5 GHz: up to 160 · 6 GHz: up to 320 MHz

Conducted TX power¹

Up to 28 dBm (2.4), 29 dBm (5), 25 dBm (6 GHz)²

Frequency range

2.401–2.483 · 5.170–5.835 · 5.925–7.125 GHz³

SSIDs

Up to 16 per radio (2.4/5 GHz); up to 2 on 6 GHz

Part number

FI2WL1050001S — EAP105 (WW)

Wireless

•  802.11k/v/r, OFDMA, BSS coloring

•  Multi-Link Operation, band steering

•  Client isolation, Open Mesh, OWE

Security

•  WPA/WPA2/WPA3 Personal & Enterprise

•  MPSK and DPSK, MAC authentication

•  DHCP snooping, ARP inspection, L3 firewall

Management

•  Standalone, ecCLOUD, ecCLOUD-VPC, EWS/VEWS

•  Zero-touch provisioning

•  SSH, SNMP v1/v2c/v3, syslog, NTP

Network, QoS & mobility

•  802.1Q and dynamic VLAN, ACL, NAT, IPv6

•  Multicast-to-unicast, WME, RSSI threshold

•  OpenRoaming (Hotspot 2.0 R1), captive portal

¹ Aggregated across MIMO chains, excluding antenna gain.  ² Limited by local regulations.  ³ Some channels restricted by local regulations. Specifications subject to change.

WI-FI & RADIO

Standards

802.11a/b/g/n/ac/ax/be (Wi-Fi 7), concurrent 2.4, 5 and 6 GHz

Radio chains / streams

2x2 per band; 6 spatial streams total

Max PHY rate

688 Mbps (2.4 GHz) · 2,882 Mbps (5 GHz) · 5,765 Mbps (6 GHz)

Channel widths

2.4 GHz: 20/40 · 5 GHz: up to 160 · 6 GHz: up to 320 MHz

Conducted TX power¹

Up to 28 dBm (2.4), 29 dBm (5), 25 dBm (6 GHz)²

Frequency range

2.401–2.483 · 5.170–5.835 · 5.925–7.125 GHz³

SSIDs

Up to 16 per radio (2.4/5 GHz); up to 2 on 6 GHz

Part number

FI2WL1050001S — EAP105 (WW)

Security

•  WPA/WPA2/WPA3 Personal & Enterprise

•  MPSK and DPSK, MAC authentication

•  DHCP snooping, ARP inspection, L3 firewall

Management

•  Standalone, ecCLOUD, ecCLOUD-VPC, EWS/VEWS

•  Zero-touch provisioning

•  SSH, SNMP v1/v2c/v3, syslog, NTP

Network, QoS & mobility

•  802.1Q and dynamic VLAN, ACL, NAT, IPv6

•  Multicast-to-unicast, WME, RSSI threshold

•  OpenRoaming (Hotspot 2.0 R1), captive portal

RedCell support

The hardware is half the story.

Buy the EAP105 through RedCell and you get US-based engineers behind it, from the first floor plan to the last firmware update.

01

Design.

Network and RF design reviews so access points land where coverage and capacity need them.

02

Pre-provision.

Units configured before they ship, so your installers hang them and go.

03

Support.

Advanced support from US-based engineers. For the EAP105, management access is included with RedCell advanced support.

01

Design.

Network and RF design reviews so access points land where coverage and capacity need them.

02

Pre-provision.

Units configured before they ship, so your installers hang them and go.

03

Support.

Advanced support from US-based engineers. For the EAP105, management access is included with RedCell advanced support.

Downloads

Documents and guides.

PDF

EAP105 Datasheet

RedCell edition · PDF · 4 pages

PDF

Quick Start Guide

From Edgecore · PDF

PDF

Wi-Fi 7 AP User Manual

From Edgecore · PDF

FAQ

EAP105 questions, answered.

Does the EAP105 need a subscription to keep working?

No. It can run in standalone mode with no cloud account at all. For central management it also works with Edgecore ecCLOUD and on-site controllers, and management access is included with RedCell advanced support.

How do I power it?

Through an 802.3at (PoE+) switch port or injector, or USB-C DC power (PD 3.0, 15–20 V). The injector and adapter are not included. For the full 5GbE uplink, connect it to a multi-gigabit switch port.

Can it go in a ceiling plenum space?

Yes. The EAP105 carries UL2043 plenum certification, the rating for equipment installed in air-handling spaces above a ceiling.

Do my devices need Wi-Fi 7 to benefit?

No. It supports 802.11a/b/g/n/ac/ax as well as Wi-Fi 7, so existing phones, laptops and TVs connect as they do today. Wi-Fi 7 devices also get 320 MHz channels on 6 GHz and Multi-Link Operation.

Can I use it outdoors or in a warehouse?

It is an indoor model rated IP41 and 0 to 50 °C, so it fits warehouse offices and conditioned floors. For docks, yards and unconditioned space, RedCell specs the outdoor OAP101.

Can I test it before I buy?

Yes. RedCell ships an access point and a PoE switch, configured for your network, for a 30-day trial, with a US-based engineer on call throughout.

FROM REDCELL INSIGHTS

Read before you buy.

Edgecore EAP105 access point, angled view

LICENSING & OWNERSHIP

What happens when your Meraki license expires?

Meraki gives you 30 days of grace. After that, Cisco says devices stop passing client traffic.

Read article →

Edgecore EAP101 access point

HOSPITALITY

Hotel Wi-Fi that doesn’t end up in bad reviews

How to design hotel Wi-Fi that covers every room and holds up at peak hours.

Read article →

Edgecore ECS5500-12P switch, angled view

OPEN NETWORKING

White box switches explained: what they are and who builds them

How disaggregated hardware works, who builds it, and when it makes sense for a business.

Read article →

Related

Keep exploring.

Other Edgecore devices RedCell deploys, and the full lineup.

Server icon

All Edgecore devices

Switches, access points and how RedCell deploys them. Back to Edgecore →

Wi-Fi icon

Edgecore EAP101

Wi-Fi 6 indoor access point. View device →

Wi-Fi icon

Edgecore EAP102

Wi-Fi 6 indoor access point. View device →

Wi-Fi icon

Edgecore EAP101

Wi-Fi 6 indoor access point. View device →

Wi-Fi icon

Edgecore EAP102

Wi-Fi 6 indoor access point. View device →

Put Wi-Fi 7 in your next project.

Talk to a RedCell engineer: 813 885 2600  ·  redcelltechnologies.com/contact

Request a 30-day trial

Put Wi-Fi 7 in your next project.

813 885 2600  ·  redcelltechnologies.com/contact