Decorative red wave lines

Home / Edgecore / Access Points / EAP102

Indoor Wi-Fi 6 access point

Edgecore EAP102
4x4 Wi-Fi 6. No subscription.

A high-capacity Wi-Fi 6 access point with 4x4 MU-MIMO on 5 GHz and two 2.5GbE ports, built for busy floors, conference rooms and lobbies. RedCell designs, pre-provisions and supports it from the US.

Edgecore EAP102 access point
Edgecore EAP102 access point
Edgecore EAP102 access point, angled view
Edgecore EAP102 access point, rear view
Edgecore EAP102 access point, side view
Edgecore EAP102 access point, ports view

2.9 Gbps

Max aggregate data rate

4x4

MU-MIMO on 5 GHz

2.5GbE

PoE+ uplink, plus a 2.5GbE LAN port

OpenWiFi

Open-source version supported

2.9 Gbps

Max aggregate data rate

4x4

MU-MIMO on 5 GHz

2.5GbE

PoE+ uplink, plus a 2.5GbE LAN port

OpenWiFi

Open-source version supported

Edgecore EAP102 access point

Overview

More capacity for the busiest rooms.

The EAP102 pairs 2x2 on 2.4 GHz with 4x4 MU-MIMO on 5 GHz, serving more devices at once in lobbies, open offices and meeting spaces. Both Ethernet ports run at 2.5GbE. It runs standalone or under ecCLOUD and EWS controllers, with no license that has to stay paid for it to keep working.

4x4 Wi-Fi 6 on 5 GHz

2x2 on 2.4 GHz and 4x4 MU-MIMO on 5 GHz, with 80 MHz channels.

Up to 2.9 Gbps aggregate

574 Mbps on 2.4 GHz and 2,400 Mbps on 5 GHz.

Two 2.5GbE ports

802.3at PoE input on a 2.5GbE uplink, plus a 2.5GbE LAN port.

Enterprise security

WPA3 Personal and Enterprise, MAC authentication, captive portal and client isolation.

Up to 2.9 Gbps aggregate

574 Mbps on 2.4 GHz and 2,400 Mbps on 5 GHz.

BLE radio built in

Bluetooth Low Energy for iBeacon applications.

Manage it your way

Standalone, Edgecore ecCLOUD or EWS controllers, with QR-code onboarding. OpenWiFi version available.

Two 2.5GbE ports

802.3at PoE input on a 2.5GbE uplink, plus a 2.5GbE LAN port.

Enterprise security

WPA3 Personal and Enterprise, MAC authentication, captive portal and client isolation.

BLE radio built in

Bluetooth Low Energy for iBeacon applications.

Manage it your way

Standalone, Edgecore ecCLOUD or EWS controllers, with QR-code onboarding. OpenWiFi version available.

Specifications from Edgecore’s published EAP102 product page.

Overview

More capacity for the busiest rooms.

The EAP102 pairs 2x2 on 2.4 GHz with 4x4 MU-MIMO on 5 GHz, serving more devices at once in lobbies, open offices and meeting spaces. Both Ethernet ports run at 2.5GbE. It runs standalone or under ecCLOUD and EWS controllers, with no license that has to stay paid for it to keep working.

Use cases

Where the EAP102 fits.

How RedCell puts the EAP102 to work in the industries we serve.

Bed icon

Hospitality: lobbies and meeting space

4x4 MU-MIMO on 5 GHz handles crowds in lobbies, ballrooms and conference areas, with captive portal for guests.

Store icon

Multi-site restaurants & retail

Larger stores and dining rooms get more capacity, with POS, staff and guest traffic kept apart by VLAN.

School icon

Education

Lecture halls, libraries and common areas where many devices connect at once, with WPA3-Enterprise.

Venue icon

Sports & venues

Suites, clubs and press areas. For concourses and open-air areas, RedCell specs the outdoor OAP101.

Warehouse icon

Warehousing: offices and indoor floors

Conditioned indoor space (0–45 °C). For docks and yards, RedCell specs the outdoor OAP101.

Users icon

Offices & multi-tenant buildings

Open offices and shared floors, managed from ecCLOUD or an on-site controller.

Store icon

Multi-site restaurants & retail

Larger stores and dining rooms get more capacity, with POS, staff and guest traffic kept apart by VLAN.

School icon

Education

Lecture halls, libraries and common areas where many devices connect at once, with WPA3-Enterprise.

Warehouse icon

Warehousing: offices and indoor floors

Conditioned indoor space (0–45 °C). For docks and yards, RedCell specs the outdoor OAP101.

Users icon

Offices & multi-tenant buildings

Open offices and shared floors, managed from ecCLOUD or an on-site controller.

30-day Edgecore trial

Test it on your network before you buy.

We ship you an Edgecore access point and switch, configured by RedCell for your network. Run them for 30 days, see the performance for yourself, then decide.

Check icon

An access point and a PoE switch, shipped to you

Check icon

Pre-configured by RedCell before it leaves

Check icon

A US-based engineer on call for the whole trial

Edgecore ECS5500-12P switch, angled view Edgecore EAP105 access point, angled view
Edgecore ECS5500-12P switch, angled view Edgecore EAP105 access point, angled view

Specifications

Full specifications.

From Edgecore’s published EAP102 product page.

HARDWARE & PHYSICAL

Uplink port

1 x 10/100/1000/2.5GBASE-T RJ-45, auto MDI-X, 802.3at PoE in

LAN port

1 x 10/100/1000/2.5GBASE-T RJ-45, auto MDI-X

Console & USB

1 x RJ-45 console, 2 x USB 2.0 (one active at a time)

Power

12 V / 2.0 A DC (adapter included) or 802.3at PoE (injector optional)

Max power draw

25 W (22 W on DC power)

Dimensions

195 x 201 x 39.8 mm

Weight

0.7 kg

Antenna

4 built-in; 5.5 dBi (2.4 GHz, BLE), 7.6 dBi (5 GHz)

Mounting

Wall, ceiling or T-bar; kit included

Operating environment

0 to 45 °C (32 to 113 °F); 5–95% RH non-condensing

Certifications

FCC, CE, LVD, NCC, BSMI, VCCI, JATE, TELEC, IC, C-Tick

WI-FI & RADIO

Standards

802.11ax (Wi-Fi 6), concurrent 2.4 and 5 GHz

Radio chains / streams

2x2:2 (2.4 GHz), 4x4:4 (5 GHz), MU-MIMO

Max PHY rate

574 Mbps (2.4 GHz) · 2,400 Mbps (5 GHz)

Channel widths

2.4 GHz: 20/40 · 5 GHz: 20/40/80 MHz

Conducted TX power¹

Up to 23 dBm (2.4 GHz), 26 dBm (5 GHz)²

Frequency range

2.400–2.483 · 5.150–5.850 GHz³

SSIDs

Up to 16 per radio (32 total)

Wireless

• 802.11k/r and OFDMA

• Client isolation

• Open Mesh

Security

• WPA/WPA2/WPA3 Personal & Enterprise

• WPA3 transition modes

• MAC address authentication

Management

• Standalone, ecCLOUD, EWS controller

• QR-code onboarding

• SSH, SNMP v2c, syslog, NTP

Network, QoS & mobility

• 802.1Q and dynamic VLAN, ACL, NAT

• STP, DHCP, LLDP, RSSI threshold

• OpenRoaming, captive portal, TWT

¹ Aggregated across MIMO chains, excluding antenna gain. ² Limited by local regulations. ³ Some channels restricted by local regulations. Specifications subject to change.

WI-FI & RADIO

Standards

802.11ax (Wi-Fi 6), concurrent 2.4 and 5 GHz

Radio chains / streams

2x2:2 (2.4 GHz), 4x4:4 (5 GHz), MU-MIMO

Max PHY rate

574 Mbps (2.4 GHz) · 2,400 Mbps (5 GHz)

Channel widths

2.4 GHz: 20/40 · 5 GHz: 20/40/80 MHz

Conducted TX power¹

Up to 23 dBm (2.4 GHz), 26 dBm (5 GHz)²

Frequency range

2.400–2.483 · 5.150–5.850 GHz³

SSIDs

Up to 16 per radio (32 total)

RedCell support

The hardware is half the story.

Buy the EAP102 through RedCell and you get US-based engineers behind it, from the first floor plan to the last firmware update.

01

Design.

Network and RF design reviews so access points land where coverage and capacity need them.

02

Pre-provision.

Units configured before they ship, so your installers hang them and go.

03

Support.

Advanced support from US-based engineers, plus firmware and configuration help across your whole fleet.

01

Design.

Network and RF design reviews so access points land where coverage and capacity need them.

02

Pre-provision.

Units configured before they ship, so your installers hang them and go.

03

Support.

Advanced support from US-based engineers, plus firmware and configuration help across your whole fleet.

Downloads

Documents and guides.

PDF

EAP102 Datasheet

RedCell edition · PDF · 4 pages

PDF

Quick Start Guide

From Edgecore · PDF

PDF

Wi-Fi 6 AP User Manual

From Edgecore · PDF

FAQ

EAP102 questions, answered.

Does the EAP102 need a subscription to keep working?

No. It can run in standalone mode with no cloud account at all. For central management it works with Edgecore ecCLOUD and EWS controllers.

EAP101 or EAP102: which do I need?

Both are dual-band Wi-Fi 6. The EAP102 adds 4x4 MU-MIMO on 5 GHz and two 2.5GbE ports, so it suits busier spaces. The EAP101 has two extra GbE LAN ports for wired devices in the room.

How do I power it?

Use the included 12 V DC adapter, or power it over Ethernet from an 802.3at (PoE+) switch or injector. Connect it to a multi-gig switch port to get the full 2.5GbE uplink speed.

Does it support OpenWiFi?

Yes. An OpenWiFi version of the EAP102 is available. Ask RedCell which version fits your deployment.

Can I use it outdoors?

No. The EAP102 is an indoor access point rated for 0 to 45 °C. For docks, yards, concourses and other outdoor areas, RedCell specs the Edgecore OAP101.

Can I test it before I buy?

Yes. RedCell ships you an Edgecore access point and a PoE switch, pre-configured for your network, to run for 30 days. A US-based engineer is on call for the whole trial.

FROM REDCELL INSIGHTS

Read before you buy.

Edgecore EAP105 access point, angled view

LICENSING & OWNERSHIP

What happens when your Meraki license expires?

Meraki gives you 30 days of grace. After that, Cisco says devices stop passing client traffic.

Read article →

Edgecore EAP101 access point

HOSPITALITY

Hotel Wi-Fi that doesn’t end up in bad reviews

How to design hotel Wi-Fi that covers every room and holds up at peak hours.

Read article →

Edgecore ECS5500-12P switch, angled view

OPEN NETWORKING

White box switches explained: what they are and who builds them

How disaggregated hardware works, who builds it, and when it makes sense for a business.

Read article →

Related

Keep exploring.

Other Edgecore devices RedCell deploys, and the full lineup.

Server icon

All Edgecore devices

Switches, access points and how RedCell deploys them. Back to Edgecore →

Wi-Fi icon

Edgecore EAP101

Dual-band Wi-Fi 6 with two extra LAN ports. View device →

Wi-Fi icon

Edgecore EAP105

Tri-band Wi-Fi 7 indoor access point. View device →

Wi-Fi icon

Edgecore EAP101

Dual-band Wi-Fi 6 with two extra LAN ports. View device →

Wi-Fi icon

Edgecore EAP105

Tri-band Wi-Fi 7 indoor access point. View device →

More capacity for your busiest rooms.

Talk to a RedCell engineer: 813 885 2600 · redcelltechnologies.com/contact

Request a 30-day trial

More capacity for your busiest rooms.

813 885 2600 · redcelltechnologies.com/contact